Mini tub 1967 camaro - Lateral-g Forums

dubs67 · #1 03-10-2009, 04:17 PM

Im just wondering what all is needed to fit a 18x12 with a 345/30 tire under the back of the car? i heard that the frame rails might need to be cut into a little so the tire can all fit?

68protouring454 · #2 03-10-2009, 05:06 PM

dse mini tub, with the mini tub you will need to notch most of the width of the frame rail in the back corner of tub

BBC69Camaro · #3 03-10-2009, 07:40 PM

Check out this thread over at Pro-Touring.com lots of good pictures and links:
http://www.pro-touring.com/forum/showthread.php?t=46900

ItDoRun · #4 03-10-2009, 09:47 PM

I've never heard of a 345/30 in a 67 Camaro. The 335's are tight enough. 345's will work in a 69 Camaro, though. I believe the only way a 345 will fit your car is if you order the tubs and frame rails from Mike Riggs @ Mike's Custom Cars and then modify the trunk pan for the additional clearance. His tubs are ~4.5" wider than stock versus DSE's which are ~ 2.75" over stock. Check out his web-site. He has tons of photos.

dubs67 · #5 03-11-2009, 01:19 PM

Thanks guys, i talked to a body shop that specializes in this and they said they could either back half the car but i would lose the rear seat or they could just build new frame rails and move them in a bit and customiz a 4 link system to fit. With everything including a dif and mini tubbing with frame connectors it would be around 10,000.00. you guys think this is a alright price?