Seat Belt attachment points are done. All have Grade 8 nuts welded to 1/8" plate. I completely removed the factory attachment points on the tunnel side and created all new pieces. I left the factory points on the door side and then added my own plates and a new mounting point further back. All the plates are connected to the seat mounting tubes and/or the roll cage. Fabbed up a channel for the fuel line and the brake line. I'll clean up all the welds and finish the rest once it's back on the rotisserie.
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Threaded Mode