70 Camaro - Boise, Idaho

[waynieZ]

Nice! This should be interesting to watch.

[rixtrix1]

Cool way to mold inner fenders. Can't wait to see the results!

[Goosesdad]

Seat Belt attachment points are done. All have Grade 8 nuts welded to 1/8" plate. I completely removed the factory attachment points on the tunnel side and created all new pieces. I left the factory points on the door side and then added my own plates and a new mounting point further back. All the plates are connected to the seat mounting tubes and/or the roll cage.





Fabbed up a channel for the fuel line and the brake line. I'll clean up all the welds and finish the rest once it's back on the rotisserie.

[Goosesdad]

Originally Posted by waynieZ

Nice! This should be interesting to watch.

Originally Posted by rixtrix1

Cool way to mold inner fenders. Can't wait to see the results!

Thanks! Should work pretty well..... I expect to have it back on the rotisserie in next month or so and I'll laminate them then.

[Goosesdad]

Originally Posted by GregWeld

My guess is the improved belt attachments are only about 400% better.... LOL


Nice work as we've come to expect from you!

Originally Posted by waynieZ

Most definitely!

Thanks Wayne and Greg!!! I've got a lot to protect! Ha!