Getting ready to start my project (69' Camaro) need advice...

[Aschle]

I have been on this forum for as long as it has existed, same with pro-touring.com , I just rarely post as I am not near the talent that most of you are... Anyways, I would like to get some advice on rebuilding my car, I know there are plenty of members here that can help. My car has been in my posession for a good number of years but the funds have not, so it has been sitting. Before I bought it, the previous owner had cut the rear end out to tub it for drag racing, installed a 12 point cage... I think they butchered it, but that's beside the point. I want to return it to normal, aside from a mini tub. They put in some home made rear frame rails, I'd like to replace them with factory style. The biggest issue I have here is my budget or lack of I should say. I will piece it together as I can afford to and ALL of the labor will have to be done by myself since it costs too much to have it done. Where should I start? How can I assure the rear is straight and even? I am wanting to get the body done first, not necessarily in paint, but at least a complete shell. I am fairly good with a welder (have a Miller 185) and have a good mechanical understanding, but most of all I am not afraid to begin this project! I can do any part of this, just don't know where to start and not sure how exactly to go about it just yet. I have to do the passenger side quarter, possibly the drivers side too... Any pointers will be GREATLY appreciated !!!

Jason