Trying to figure out brake problem with rear disc upgrade

[Apogee]

Originally Posted by CreepinDeth

...So let me make sure I understand this.
You crack the 2 fittings while pressing the plunger in on the MC.....to get the air out.
Then before releasing the plunger you tighten the 2 plugs ???

....or did I misunderstand that ??

That's about right, except I just do one fitting at a time since I'm usually juggling a rag and trying not to get brake fluid everywhere. Have someone press and hold the pedal while you crack open and then close one fitting at a time and repeat until you're satisfied. I've found that 1-2 times per fitting seems to be plenty most installations.

Tobin
KORE3