69 AMC Javelin Project

[Jtomas801]

Hey Scott, we got a couple things done, as we only worked on it Monday. We got the plates welded on the inside of the frame rails, cut and welded in the cross member that will hold the front of the fuel cell and support a sway bar in the future. We also got the chassis side panhard bar mount made and welded in the car.


Yes, the chassis side panhard bar is a little off plum, but it is fixed now, lol.





We still have to make the upper shock cross member, but that will have to wait till the roll bar gets put in. Besides that some extra bracing and fully weld all the brackets to the axle, the rear suspension is done.

I think the next thing we are going to tackle, is mini tubing the rear and notching the frame rails. I will be running a 315 tire, There is no way I will be able to fit a 335 back there, but I think a 315 is big enough.

Thanks,
Jon