Introducing Project Sabre, 1971 Cutlass S Pro-Touring car

[SparkyRnD]

Here is how it sat on 9/12/12 at Bulldawg Musclecar's shop:





Here are some pictures of the front fenders and the floorpan progress:





The front fenders are done and ready for paint. The body is still being worked on, but it getting much closer. Hopefully another few weeks and it'll be ready for painting. The front floor pans had some very very tiny pin holes. Not much to worry about, but since it was down this far, I went ahead and got some new front pans to have installed, as I don't want to mess with it again.

The seat mounts are going to be redone, as they currently are just tack welded and don't have any supports or tie-ins to the structure. The body guy is tackling that as well as the floor pans. His goal is to have it in the booth between mid to late december and early january. That would put us starting to reassemble around the second week in january. With any luck, all the pieces will fall into place and it'll be on the road within a month of finishing paint. That would give us several weeks of road testing and tweaking to get it ready for spring-time events.

On the upholstery, nothing so far. He is slammed and hasn't had time to get to our seats or doors yet.