1970-81 DSE Frame "Extras"

[Z06vette]

Originally I had them because I had a C6 oil pan, and stainless works headers. Since the DSE headers req'd set back mounts, I thought the SW would as well. I had everything back in the car, but the FAST 102 was against the firewall. I could have modded the firewall, but I had just welded up the uneeded holes & repainted it. The headers were about 1/8" from the toeboard on the driver's side, and the alt was about that close to the frame.(F body Acc) I switched mounts to stock location and went to F body oil pan. Everything fits well. Amazing how much difference 1" can make. I can just about slide my hand between the floor and the crossmember with the G-force.
Scott