Ridetech control arms, should this move?

[Vince@Meanstreets]

Originally Posted by cpd004

Got ya. Thanks so much for the help! This is definitely new territory for me. I'm the guy they should hand the whole kit too while someone watches and writes instructions. A video wouldn't hurt either.

On another note, is it possible to overtighten the lower bolt that goes through the two spacers at the heim ball? I would guess it wouldn't matter as this shouldn't prevent the ball from moving freely.

no problem, any time.

Minimum torque on a 5/8" bolt is 150 ft lbs min and 180 ft lbs max

Since we are going with a nylock nut I usually so 45-65 ft lbs