Aftermarket C6 Front Suspension components

[Jtomas801]

Item Location (City/State):
Covina, CA
Price:
$40 - $650
Description:

I am selling off most of my C6 front suspension stuff, going a different route because of the issues I have found with my frame. This would make a great setup if someone is buying a bare c6 front frame and need the components for it.

The GMR C6 front hubs. Includes brake rotor adapters, 8 on 7", for The Brake Man (TBM Brakes) 13" rotors or others and includes the socket to replace and repack the bearings. They have 1/2" studs set up on a 5 on 4.75" bolt pattern. Rotor adapters are still available for Wilwood and Baer brakes. $650 obo.

20170722_173233 by Jonathan Feltis, on Flickr

C6 Corvette uprights, new just mocked up on car. The steering arms have been cut off. SOLD

20170722_174309 by Jonathan Feltis, on Flickr


AGR performance power steering rack. Part#712581, Never used, just mocked up. Slight surface rust on some of the hardlines as seen in the pictures. includes tie rod ends. SOLD

20170722_180526 by Jonathan Feltis, on Flickr

Speedway Engineering 3 piece sway bar 1-1/4" x 32", with steel arms, bushings and hardware. SOLD

20170722_183644 by Jonathan Feltis, on Flickr

Chassis Works shock mounts. $45 obo.

20170722_192450 by Jonathan Feltis, on Flickr

Aurora rod ends, 3/4" x 3/4". There are 5 AM12T right hand and 5 AB12T left hand. Teflon lined. $40 Ea obo

20170722_184538 by Jonathan Feltis, on Flickr


ARP wheel studs, Part #ARP-100-7705, 2 packs of 5. $10 Ea.

20170722_181857 by Jonathan Feltis, on Flickr

Thanks,
Jon