Installing new quarter panels

[comp-spec]

Looking at were you are I would put the suspension back in and make it roller Setting on all 4 wheels
Then hang your doors, nose, quarters and trunk..get all the lines right then finish up the quarters. That way you will know what you have. You should do this mock up or you will be fighting lines and once the qrts are on they can't be moved

[markd]

Originally Posted by comp-spec

Looking at were you are I would put the suspension back in and make it roller Setting on all 4 wheels
Then hang your doors, nose, quarters and trunk..get all the lines right then finish up the quarters. That way you will know what you have. You should do this mock up or you will be fighting lines and once the qrts are on they can't be moved

Yeah, I agree with comp-spec. What he described is the preferred method and exactly what we did with my car. See picture below:

[scherp69]

Thanks guys. That's what I'm going to do. That way it will also give me an opportunity to see what the G-Bar suspension looks like with the Moser M9. Thanks again for the help.