Rear wheels under a 67 Camaro - Lateral-g Forums

**MODO Innovations** · #1 08-06-2008, 08:01 PM

Like Frank stated it is a tight fit. I have 18 x 12 w/ a 335 under my 67. It has been a while since I bought the wheels and I'm not sure on the back spacing I think they are 6". I will have to look and see and also give the rear end overall length (9" ford). I know, I know, it needs to be lowered a bit.

tmadden · #2 08-06-2008, 08:42 PM

So if I understand you guys correctly, I should go with a 19x11 or 18x1 on the back? They should fit sweetly without any mods besides the mini tubs.

**Spiffav8** · #3 08-06-2008, 08:49 PM

Quote:

Originally Posted by tmadden

So if I understand you guys correctly, I should go with a 19x11 or 18x1 on the back? They should fit sweetly without any mods besides the mini tubs.

That's what it sounds like to me. I run an 18x10 with no tubs, so I'm sure you can get an 18x11 in there with tubs. You'll just need to check your back spacing.

**Spiffav8** · #4 08-06-2008, 08:47 PM

Quote:

Originally Posted by MODO Innovations

Like Frank stated it is a tight fit. I have 18 x 12 w/ a 335 under my 67. It has been a while since I bought the wheels and I'm not sure on the back spacing I think they are 6". I will have to look and see and also give the rear end overall length (9" ford). I know, I know, it needs to be lowered a bit.

I think your ride height is perfect. Besides, as you add more weight while finishing the car, it should come down a little.

**MODO Innovations** · #5 08-07-2008, 07:30 PM

I found my information on my wheels and rearend. The wheels are 18 x 12 w/ 6.5" BS, and the rearend is 57" rotor to rotor (wheel mounting surface).

ItDoRun · #6 08-08-2008, 01:34 PM

Jeff,
Did you have to roll the quarter lips?

**MODO Innovations** · #7 08-12-2008, 12:06 PM

My outer wheel well lips were already rolled when I bought the car. I would suggest doing it though.