A 67 Camaro @ Ironworks??????

[ironworks]

I'm a wholesale dealer for procharger, so I will go with them to give the customer the best deal. I may buy a bare core and make our own inlet and out let to get exactly what I want. Nobody makes an intercooler for a 67 camaro.

Rodger

[novanutcase]

Originally Posted by ironworks

Nobody makes an intercooler for a 67 camaro.

Rodger

Or a '66 Nova.....

But you guys made it work and work well!!

John

[awr68]

What wheels did Rich decide on?

[Jr]

Originally Posted by ironworks

Nobody makes an intercooler for a 67 camaro.

Rodger

Rodger,
Larry has a ron davis intercooler for his 1968 project...

http://www.pro-touring.com/forum/sho...t=42538&page=7

I think it would work for a 1967, but I'm not sure about that.

I like the design for the intercoolers on johns 66

[ironworks]

That thing sure looks cool, but If I can do a single inlet and outlet rich will be very happy when the bill comes. Plus it will clean up the engine compartment and not bury everything under plumbing. With that set up I would have to split the outlet from the Procharger to go to both sides and then connect them back togther for the throttle body. Since he is running twin turbos on that deal I think it is more well suited for his application.

Rodger

[awr68]

Rodger here's what I used......

[ironworks]

Thanks, that is what I was thinking just wider or possibly two of them. I'm figuring we will have to modify that hood latch support brace and also fit the Ac condensor in there. If I can do a thinner but wider intercooler it will allow more direct air to the condensor. Air flow is key to a cold AC with 134.

Rodger

[awr68]

I fit the condensor in there and just had to notch the hood latch support a little....not a big deal realy.

[CRCRFT78]

Any updates?