After 1 fax, a few emails to stainless works. Searching from ebay.Talking with Jegs and summit without any reasonable results I finally got the exhaust grommets I wanted for my project.
And all this happened because of the help of ProTouring442 aka Bill
THANK YOU BILL for showing what true hotrodding spirit is. I highly appreciate it
I have heard the black ones tend to melt. I was told there is a difference in the blue silicone ones and the black ones. Are they made of silicone or rubber?
I have heard the black ones tend to melt. I was told there is a difference in the blue silicone ones and the black ones. Are they made of silicone or rubber?
Rodger
Hello Rodger, i believe they are rubber.I try find out. If there is a risk of melting i set the mounts little bit farther away from pipes
__________________
63 Z06
Last edited by Bowtieracing; 10-08-2008 at 10:06 PM.
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Big Thank You For Bill !!!
Where did you find those?
Contact Street Rods by Michael / 
Hybrid Mode
