widest wheel for 67 Camaro

[goob8869]

Originally Posted by EVS Motors Inc.

From my experience you can fit a 10" wide wheel in the back. A 275mm tire is the safest wide tire to run, but you can also fit a 285 with some fender rolling and trimming.

Do you have any pictures with a 67 or 68 with this size on them

[skatinjay27]

Originally Posted by goob8869

Do you have any pictures with a 67 or 68 with this size on them

curtis's 67 had 10" with 285 on his...
dont know the exact BS but tony watley would since he's the one that ordered them. they have pretty big lips for 10"s though.
http://www.fquick.com/garages/viewga...=1&carid=11351

[goob8869]

Originally Posted by skatinjay27

curtis's 67 had 10" with 285 on his...
dont know the exact BS but tony watley would since he's the one that ordered them. they have pretty big lips for 10"s though.
http://www.fquick.com/garages/viewga...=1&carid=11351

do you know how I can get in touch with him

[skatinjay27]

Originally Posted by goob8869

do you know how I can get in touch with him

pm him. thier board names here are

curtis- spiffav8

tony-nineball

[Surfman423]

Is the general concensus a 20x10 with a 275 will fit athe rear of a 67-68 Camaro? Are you relocating springs to accomplish thus?

[MarkM66]

Originally Posted by Surfman423

Is the general concensus a 20x10 with a 275 will fit athe rear of a 67-68 Camaro? Are you relocating springs to accomplish thus?

It'll fit on a stocker, but it won't be able to sit low. No way that will tuck under the wheel house. Just depends on what's more important to you.

[Surfman423]

Originally Posted by MarkM66

It'll fit on a stocker, but it won't be able to sit low. No way that will tuck under the wheel house. Just depends on what's more important to you.

My plan is to drop it 2" with a Hotchkis TVS kit. Would a 20x8.5 be better or should I just stick with 18" all around?

[Spiffav8]

Originally Posted by goob8869

do you know how I can get in touch with him

I think I still have all the paper work for the car somewhere. PM me and I'll see if I can find it.

[sevillaz28]

I know your looking at a bigger wheel but I had 17x11 with a 315/40/17 on the back of mine, 5.5 back spacing and all i did was roll the outer lip a little and they never rubbed. I have a few pics of the car on the track and you can see the wheel going into the wheel well. I'm still running springs in the rear.

[67rstbkt]

Originally Posted by sevillaz28

I know your looking at a bigger wheel but I had 17x11 with a 315/40/17 on the back of mine, 5.5 back spacing and all i did was roll the outer lip a little and they never rubbed. I have a few pics of the car on the track and you can see the wheel going into the wheel well. I'm still running springs in the rear.

I would love to see those pics if you have time to post them