...

Go Back   Lateral-g Forums > Lateral-G Open Discussions > Artwork and Collectibles
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 03-15-2010, 06:47 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,475
Thanks: 7,715
Thanked 2,362 Times in 1,104 Posts
Default

Quote:
Originally Posted by E.rodz View Post
love to see that i am not the only one doing ten or more projects at one time.lol. whay happened to the vega? is this the drivetrain that you were using for that build?can't wait to see some build picts.
nope, down to just one. Sold the Vega, and yes, this engine/trans was going in that.

Thanks!

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #2  
Old 03-15-2010, 07:33 PM
nvr2fst nvr2fst is offline
Senior Member
 
Join Date: Dec 2007
Posts: 1,023
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by camcojb View Post
nope, down to just one. Sold the Vega, and yes, this engine/trans was going in that.

Thanks!

Jody
I was looking forward to seeing one of few, if any, pro touring vega's
But your change of plans is cool considering the majority of us here are bias towards ......ANY CAMARO, nice project and budget Jody
Reply With Quote
  #3  
Old 03-20-2010, 10:05 AM
70rs's Avatar
70rs 70rs is offline
Senior Member
 
Join Date: Feb 2009
Location: Western Washington State
Posts: 3,683
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by nvr2fst View Post
I was looking forward to seeing one of few, if any, pro touring vega's
But your change of plans is cool considering the majority of us here are bias towards ......ANY CAMARO, nice project and budget Jody
I think Jeff Schwartz is working on a LS powered Vega right now. Just a FYI, sorry for the hi jack Jody.
__________________
Eric

1970 Camaro.....on the road someday!
Reply With Quote
  #4  
Old 03-20-2010, 10:24 AM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,475
Thanks: 7,715
Thanked 2,362 Times in 1,104 Posts
Default

Quote:
Originally Posted by nvr2fst View Post
I was looking forward to seeing one of few, if any, pro touring vega's
But your change of plans is cool considering the majority of us here are bias towards ......ANY CAMARO, nice project and budget Jody
I think the Vega would be very cool. But the cost to build the Vega vs building this second Gen would be a toss up. And there's no comparison in value when the cars were done, the second gen would be worth at least twice what the Vega would be. Unfortunately, that was a factor in my decision.
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #5  
Old 03-20-2010, 07:12 PM
coolwelder62's Avatar
coolwelder62 coolwelder62 is offline
Senior Member
 
Join Date: Aug 2005
Location: Vinland Ks.
Posts: 4,315
Thanks: 0
Thanked 3 Times in 3 Posts
Default

Jody; I love the rendering.I was going to paint the car silver w/ a flat black Dale jr. style stripe.Can't wait to see it come togather.I really hope it works well for you.Scott Mock.
Reply With Quote
  #6  
Old 03-21-2010, 07:49 PM
Blake Foster's Avatar
Blake Foster Blake Foster is offline
Senior Member
 
Join Date: Oct 2005
Location: St George Utah
Posts: 2,526
Thanks: 6
Thanked 101 Times in 44 Posts
Default

Both Renderings look very cool, you know you can't go wrong either way, this will again be a very cool Jody build,looking forward to what you pick and seeing the finished product
__________________
Blake Foster
www.speedtechperformance.com
Reply With Quote
  #7  
Old 03-21-2010, 08:43 PM
DFRESH's Avatar
DFRESH DFRESH is offline
Lateral-g Supporting Member
 
Join Date: Oct 2007
Location: South Orange County, CA
Posts: 1,650
Thanks: 0
Thanked 5 Times in 3 Posts
Default

"Budget" and "Camaro", two words I really like and identify with .

Jody, when you say the rear is a quadra link style, does that mean a 4 link with a panhard bar on it? Sounds like it was a custom rear suspension setup ---
Looking forward to the pics and the build. I wish you great success in your endevors in forming an alliance with Anvil and will hope to someday be able to do the same .

Doug
Reply With Quote
  #8  
Old 03-21-2010, 09:19 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,475
Thanks: 7,715
Thanked 2,362 Times in 1,104 Posts
Default

Quote:
Originally Posted by DFRESH View Post
"Budget" and "Camaro", two words I really like and identify with .

Jody, when you say the rear is a quadra link style, does that mean a 4 link with a panhard bar on it? Sounds like it was a custom rear suspension setup ---
Looking forward to the pics and the build. I wish you great success in your endevors in forming an alliance with Anvil and will hope to someday be able to do the same .

Doug
4 link with panhard. Swivel link ends similar to what DSE uses, but not the same. It was done by Scott Mock. I know the DSE stuff works, so this should also.
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank

Last edited by camcojb; 03-25-2010 at 09:17 AM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 12:30 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net