Attention Tri-5 Chevy guys. Ironworks Do-It-Yourself chassis.

[Rybar]

That is killer Rodger, nice work I think you will do well with these.

[214Chevy]

Now, here comes the jealousy question. What about us other GM guys? Any plans to do other cars....i.e. = Chevelles, Camaros, etc? Screw the Mopar guys. Just kidding!!

[ironworks]

Originally Posted by 509Chevelle

Now, here comes the jealousy question. What about us other GM guys? Any plans to do other cars....i.e. = Chevelles, Camaros, etc? Screw the Mopar guys. Just kidding!!

The Chevelle is in the works, Currently. Should have a roller very soon.


We plan to have a few others in the works.

The Camaro market is pretty saturated with alot of great products. So it might be a while. I would do a tube chassis Camaro one before a bolt on Camaro subframe.

[Musclerodz]

What kind of reinforcing does the upper a-arm mounting plate get? Picture above shows none. I am very interested as we have a 56 HT to do as soon as I find the right candidate.

[ironworks]

There is a strip that goes around the top of 1/4" x 1" that goes in the opposite plane to the upright. We have to form these by hand they are not machined. Plus the shock mount tabs and inside crossmember help reinforce the plate that same plate.

[rocketman]

Looks cool

[customcam]

http://www.trifive.com/forums/showthread.php?t=41317

[COYBILT]

that is a awesome piece!!! I expect nothing less then this from Rodger.

I want to buy one just to weld it up, then grind it smooth and then I can feel like a all out metal fabricator.

[ProdigyCustoms]

Your timing may be perfect. I used to employ a dozen 6G certified welders in my other buisness and my best welder ever stopped by this week looking for side evening work. I like to help him out when I can but he IS NOT a car guy or I would have him full time.

I have a 57 project that may be perfect for one. We could weld it up. Maybe weld one up for JY211 while were at it?

Email me some cost and timeline.

[email protected]

[ironworks]

Email sent