DSE Quadralink or AME triangulated 4-bar - Lateral-g Forums

6spdcamaro · #1 05-07-2010, 05:26 PM

https://lateral-g.net/forums/show...ight=bolt+inch
This is a good thread with a lot of the pros and cons of each. After reading that it seams like the best way to go is a 12 bolt with big bearing torino 9" ends

johnnymac46 · #2 05-07-2010, 10:53 PM

Quote:

Originally Posted by 6spdcamaro

https://lateral-g.net/forums/show...ight=bolt+inch
This is a good thread with a lot of the pros and cons of each. After reading that it seams like the best way to go is a 12 bolt with big bearing torino 9" ends

Thanks for the help

ProdigyCustoms · #3 05-08-2010, 07:43 AM

So given a choice i would use a 12 bolt in almost all applications. Lets say every application I could use the 12 bolt I would use it. There are some suspension systems like 3 link, systems with watts link that need to use a 9" for bracktrey reasons.

If you did a G Link, only the Fabricated 9" is available jig welded and readily to bolt in. The best budget system is to get a bare 12 bolt and get the weld on bracket option on the G Link. For for a double throw down 12 bolt and G Link your right at $4800 and you have the complete rear suspension.