Ironworks Test Car Chassis for Tri-5 frame.

[ironworks]

Now after working with Kurt Urban on a few things about this engine or maybe I should say wasting his time. He has convinced me that maybe I should look at a Magnuson blower for this application for the down low brutal torque. HMMM

We are also working to get the Quick ratio Woodward rack mounted on the car and I'm looking at using some adjustable bump steer tie rods I found on line. They seem really nice. I hope to have pics of that stuff soon. Enjoy

[JamesJ]

If you put your name backwards then when someone is under the car they will be able to read it, or maybe that is just for yours...

[ironworks]

But if it is forward people will ask what it says when it is just a roller. When the body is install it is so buried you would be hard pressed to read it if it was written in NEON.


SKROWNORI. I can't even pronouce it.

[Teetoe_Jones]

Originally Posted by ironworks

SKROWNORI. I can't even pronouce it.

It's pronounced 'Hack'. You know. Because you suck at fabrication and all that.

Tyler

[ironworks]

Originally Posted by Teetoe_Jones

It's pronounced 'Hack'. You know. Because you suck at fabrication and all that.

Tyler

Well Sir you are correct, but if you look at definition #2 you will find it corresponds to this picture of these tail lights.

HACK -


And on that very note we will start back on your car right this very second....

What now???? You want more..... Pick on someone your own size....

[Teetoe_Jones]

Don't you touch that tail panel. If you do it will leave a scar. I just can't wait until you mount my HRE wheels to that chassis table- you know. Because my car has been welded to it for 2 years. I just figured it was part of the chassis at this point. Is that roll up door where you keep your Lear jet?

Tyler

[ironworks]

Originally Posted by Teetoe_Jones

Don't you touch that tail panel. If you do it will leave a scar. I just can't wait until you mount my HRE wheels to that chassis table- you know. Because my car has been welded to it for 2 years. I just figured it was part of the chassis at this point. Is that roll up door where you keep your Lear jet?

Tyler

Lear JETs..... Plural.


At least the weight of the chassis table is low. The funny thing is it is probably lighter with the table welded to it, then when the car came in as a roller.....HEHE

[GregWeld]

Originally Posted by Teetoe_Jones

. Because my car has been welded to it for 2 years.

Tyler

Hell Tyler -- I saw that car welded to a chassis table about 6 years ago at Wayne Dues shop... and I've built like 5 cars since then.

[SWAPMEETCRAZY]

Originally Posted by ironworks

Well Sir you are correct, but if you look at definition #2 you will find it corresponds to this picture of these tail lights.

HACK -


And on that very note we will start back on your car right this very second....

What now???? You want more..... Pick on someone your own size....

We can just see the love!!

[coolwelder62]

WOW!! look's awesome Rodger.It's apears to have had a ton of engineering & time spent designing it. I really enjoy studying your great work.