Satin black

[elitecustombody]

For temporary paint job or suspension,inner fenders Hot ROD black will work just fine,

[Ron Fox]

Originally Posted by elitecustombody

For temporary paint job or suspension,inner fenders Hot ROD black will work just fine,

Is Hot Rod Black a primer or paint?

[Musclerodz]

Sherman Williams Polane Carbide Black. I have looked for a replacement, but nothing beats it.

[elitecustombody]

Originally Posted by Ron Fox

Is Hot Rod Black a primer or paint?

Ron, it's catalized single stage urethane enamel.Just about every paint brand has their own version.

[kennyd]

we use standard base coat black , then we clear it with standard clear coat . then we re-clear it with standox matt clear . the reason we never use hotrod black it it stains and streaks up when you wash it and grease will stain it .

ps , and the standox matt clear , you can change the " sheen " by adjusting the hardner 3to1 vs 4to1

[Ron Fox]

Originally Posted by elitecustombody

Ron, it's catalized single stage urethane enamel.Just about every paint brand has their own version.

Is the Hot Rod Black considered a flat black?

I have seen some nice engine bays in here in flat black but wondering if it was something other than flat black.

[elitecustombody]

Originally Posted by Ron Fox

Is the Hot Rod Black considered a flat black?

I have seen some nice engine bays in here in flat black but wondering if it was something other than flat black.

It's more of a satin finish, like the 69 pics posted above

[geberhard]

Thanks guys,

The goal is more of a satin black similar to the Camaro on the first post. I am trying to find a good balance that will work on the exterior as well. The main concerns are chalking and grease stains (i.e. hand prints).

I used Kustom shop's hot rod black on a few rigs and on the buggy and they worked welll, but it was not an impressive paint, just cheap paint that I would re-shoot after rockcrawling and beating on the body. Easy rattle can or gun fix after a wash





I like the idea of a matte finish over the smooth black. Alternatively can you shoot clear smooth over black and what woudl be the outcome (glossy)?

[Musclerodz]

the sherman williams polane will not chalk or leave prints. has about the same sheen as edp

[kttrucks]

You've got plenty of options with semi-gloss black. PPG has their fixed-n-flat 2060 clear that's pre mixed if you wnat to go with base/clear, Finch used it on his Camaro as well as the 'Vette convertible that he floggs.... and every manufacturer has a version of semi-gloss. SUMMIT Racing has their hot rod black and i've used it a bunch. It's single stage urethane and has a great and EVEN (which is the hard part on large surfaces) sheen to it and lays down flat. Like any painting project, the secret to success is prep and air supply mixed with solid technique.

Definitly go with a catalyzed system, however you go. rattle cans and primer wont hold up.

KT.