325's without relocating leafs? No Prob

[coolwelder62]

Lookin good. Not old school any more.

[MarkM66]

Looks good.

Is that a 10" wide wheel?

[Track Junky]

Originally Posted by coolwelder62

Lookin good. Not old school any more.

Thanks Scott, now I just need one of your subframes for the 315's up front

Originally Posted by MarkM66

Looks good.

Is that a 10" wide wheel?

Thanks. Wheel is an 18x10.5.

[coolwelder62]

[QUOTE=Track Junky;347650]Thanks Scott, now I just need one of your subframes for the 315's up front Gaetano,I have started working on a new sub frame.That should let me run a 335 up front on a 12 inch wheel.You might want to wait.

[Track Junky]

[quote=coolwelder62;347829]

Originally Posted by Track Junky

Gaetano,I have started working on a new sub frame.That should let me run a 335 up front on a 12 inch wheel.You might want to wait.

Scott, I think 315's is as wide as I want to go up front. If I go 335's up front I will have to do the same for the rear and I dont want to relocate leaf's. Thanks though, looking forward to getting your subframe some time in the near future.

[z4me69]

Did you move the shocks in?

[Track Junky]

The transformation is complete. Finally got my R888 315's delivered and the Z06 wheels on all four's. I had to cut the rear wheel studs for the hubcentric adapters so I will be pulling axles to install correct length studs.

[Track Junky]

Originally Posted by z4me69

Did you move the shocks in?

Shocks were moved in-board but still on the outside of the frame rails.