Floater setup--yes or no

[TheJDMan]

Originally Posted by killer69

What does Mosier use for a parking brake?

PARKING BRAKE? I don't need no stinking parking brake!

But seriously, I have two options in mind. 1. Is to use a pinion mount park brake from Speedway Motors for $299. 2. Wilwood makes a puck style mechanical spot caliper which (just so happens) is the same caliper that is used for option 1. but I would mount a pair of them on the rear rotors at about the 3 o-clock position. I would just need to fabricate mounts for them, then Inline Tube can make custom cables which would connect to the factory PB cable system.

I suspect as floating hubs gain acceptance in the PT world manufactures will step up and provide the pieces I had to fabricate. Time will tell.