Convoluted mess, Wheel help please.

[badmatt]

why not get some center caps spun out on a lathe there held in by o-rings? Just a though,

Matt

[rjsjea]

I had the same issue with the hubs sticking through on my 3pc wheels when I got them. ID Luxury sent me new center caps for free.

I think BillReilly from RMS runs those wheels on his personal Dart. He'll know what needs to be done, he also has that type of hub. If not Bill, search on FABO.

[-Freak-]

Originally Posted by rjsjea

I had the same issue with the hubs sticking through on my 3pc wheels when I got them. ID Luxury sent me new center caps for free.

I think BillReilly from RMS runs those wheels on his personal Dart. He'll know what needs to be done, he also has that type of hub. If not Bill, search on FABO.

I've been searching all over the place. GmachinedartGT on FABO has them.
Had them cut down to 8" wide and the center machined out.

Once my brake kit gets here I'll take some measurements and see if I can run a 9" wide wheel on the front.

[rjsjea]

Originally Posted by -Freak-

I've been searching all over the place. GmachinedartGT on FABO has them.
Had them cut down to 8" wide and the center machined out.

Once my brake kit gets here I'll take some measurements and see if I can run a 9" wide wheel on the front.

Yeah, you can do a 9" on the front. Your going to have to get the spacing just right and wont be able ride way low without modding the fenders.