This is MY 67 Camaro

[makoshark]

I see you have a replacement rear window filler panel you primed. It's been with my experience most vinyl top cars would typically rot in the seam of that panel. My car is originally a vinyl top car and it had some pretty bad rot there which forced me to replace that panel. As with all reproduction panels, it needed tweaking to fit right up against my NOS quarters.

My computer won't read my memory card for some reason, so I haven't been able to make any updates on my car. I've been making progress though.

[Sonar Chief]

Originally Posted by makoshark

I see you have a replacement rear window filler panel you primed. It's been with my experience most vinyl top cars would typically rot in the seam of that panel. My car is originally a vinyl top car and it had some pretty bad rot there which forced me to replace that panel. As with all reproduction panels, it needed tweaking to fit right up against my NOS quarters.

My computer won't read my memory card for some reason, so I haven't been able to make any updates on my car. I've been making progress though.

The filler panel rusted from water sitting in the lip under the weatherstripping was glued. I know now to use the self leveling sealer in this area to prevent water from getting between.
Hey, did you ever get the parts from that warehouse deal? I saw you got one mini tub in, how's the other one coming along? I haven't ordered mine yet.

[makoshark]

Self-leveling seam sealer where? In the rear window filler panel to quarter or in the trunk weatherstrip seam area?

I have the mini tubs done. I still need to attach the passenger side trunk support brace and then make the closeout pieces at the package tray area. I'm thinking about making a panel that closes off the trunk completely from the interior compartment, so not ready to finish that part yet.

I do have the new part here. Ready whenever you are

[Sonar Chief]

Originally Posted by makoshark

Self-leveling seam sealer where? In the rear window filler panel to quarter or in the trunk weatherstrip seam area?

I have the mini tubs done. I still need to attach the passenger side trunk support brace and then make the closeout pieces at the package tray area. I'm thinking about making a panel that closes off the trunk completely from the interior compartment, so not ready to finish that part yet.

I do have the new part here. Ready whenever you are

In the trunk weatherstrip lip where the rear filler and the speaker shelf meet needs self leveling seam sealer.

Congrats on the mini tubs
Thanks on the gas cap ... I won't forget!

[Steve68]

Primer looks good, now your tree wont rust!!!

[waynieZ]

I know money doesn't grow on trees but your lucky down in Texas you have Camaro parts growing on trees. If you wait longer do they turn from green to another color when they're ripe?? It looks like you did a nice job laying down the primer.

[Sonar Chief]

Originally Posted by Steve68

Primer looks good, now your tree wont rust!!!

You know I didn't think of that ... thanks for the words.

Originally Posted by waynieZ

I know money doesn't grow on trees but your lucky down in Texas you have Camaro parts growing on trees. If you wait longer do they turn from green to another color when they're ripe?? It looks like you did a nice job laying down the primer.

Yeah, these parts will go from green to GOLD when ripe I have had my DeVilbiss HVLP gun for 15 years and I keep telling myself I need a new one, and every time I spray something new it comes out perfect No need to change I guess.

Thanks for noticing!