BluePrint Engines Pro Series Chevy LS 427

[BluePrint Engines]

Gofast and dduke2,

I wanted to come on here and let you know if you have any specific questions about the LS engine please let me know and I will be glad to help.

Thanks,

Andrew Obermeier
BluePrint Engines

[email protected]

[bowtienewbie]

Hey guys... working on a new to me '69 Maro and came across your post. I was looking at the 427 from blueprint also. I've been looking around for awhile and came across this video

https://www.youtube.com/watch?v=7epehLbatCo

Which later lead me to this:

http://www.streetlegaltv.com/project...thread-update/

I found a couple of other posts from guys with their LS. Yellow Bullet maybe?? If I find them I will post.

I'm still about 6 months out but need to start saving now for it!

[dduke2]

Originally Posted by bowtienewbie

Hey guys... working on a new to me '69 Maro and came across your post. I was looking at the 427 from blueprint also. I've been looking around for awhile and came across this video

https://www.youtube.com/watch?v=7epehLbatCo

Which later lead me to this:

http://www.streetlegaltv.com/project...thread-update/

I found a couple of other posts from guys with their LS. Yellow Bullet maybe?? If I find them I will post.

I'm still about 6 months out but need to start saving now for it!

I am also 6 months out. I will post pictures of build.. Again thanks

[XLexusTech]

Originally Posted by BluePrint Engines

Gofast and dduke2,

I wanted to come on here and let you know if you have any specific questions about the LS engine please let me know and I will be glad to help.

Thanks,

Andrew Obermeier
BluePrint Engines
Product Specialist
1.800.483.4263 ext # 138
[email protected]

Andrew, do you offer 500 HP ls3 options? anything in the 6-8K range?
Also those muscle car pans stick down too low in the Gen1 F body.. do you offer options?

[Gofast]

I just ordered a engine this week from blue print I got the 427 retro fit fuel injection one

[XLexusTech]

Originally Posted by Gofast

I just ordered a engine this week from blue print I got the 427 retro fit fuel injection one

Awesome... keep us posted on how you make out... what harness and pan are you using and whats it going into?

[carbuff]

Personally I would love to see some dyno plots on the various engines, but particularly the 427 with the 4-barrel EFI setup. That's similar to what I'm using in my car, but it's good to know what I may want to step up to in the future.

[Gofast]

Originally Posted by XLexusTech

Awesome... keep us posted on how you make out... what harness and pan are you using and whats it going into?

I'm putting it in a 1970 CST 10 with a t56 It comes with a harness and oil pan it should fit i will find out soon i will post it in the truck section soon I'm currently boxing the frame in.

[dduke2]

Originally Posted by Gofast

I just ordered a engine this week from blue print I got the 427 retro fit fuel injection one

Please keep me posted. I should be ready in 6 months. I have a 68 camaro ss

[BluePrint Engines]

Hey guys I wanted to get back on and give you an update, I did just add a video of the PSLS4242CTF running on the dyno to our YouTube page, here is the link https://www.youtube.com/watch?v=_wtOJmqXnLw

XLexusTech,
Currently we are only offering the 427ci LS3 and they all are going to be right at the 625HP range but we do have some LS options still in R&D that will be based off of the iron block. We know the GM muscle car pan is far from optimum, so we have engineered and designed a new pan from the ground up, it has improved baffling and improved flow to and from the filter. We're getting the foundry molds made and we should have our first castings in a couple months. I think you will like the new design!

Andrew Obermeier
BluePrint Engines

[email protected]