Budget '69 Camaro Track Car - NO WHINERS!

[intocarss]

Originally Posted by Vince@MSperfab

i'll get something up soon, had a parts delay on another project so it put me off a bit.

hey, we got his airbox to fit with the addition of the 2" spacer. Someone should help me find a lip seal that will work. edit....similar to this..

I like that air box! INMOHO I don't like the MSD boxes up on the firewall, To much heat and heat is what kills them

[Rick D]

Almost there Gae!! When are we going to see that start up video??

[Flash68]

Originally Posted by Rick D

When are we going to see that start up video??

We're not.

[Sieg]

Originally Posted by intocarss

I like that air box!

I found that interesting as well, how did that piece come into existence?

[intocarss]

Originally Posted by Sieg

I found that interesting as well, how did that piece come into existence?

Didn't Vinnie make it??

[Track Junky]

Originally Posted by intocarss

I like that air box! INMOHO I don't like the MSD boxes up on the firewall, To much heat and heat is what kills them

Me neither Jer....it's on the list of things to do. I have the new 6AL box that MSD just came out with. It's a plug in deal and comes with extra wiring for longer runs. Eventually I will install it inside the car.

Originally Posted by Rick D

Almost there Gae!! When are we going to see that start up video??

Originally Posted by Flash68

We're not.

I promise I'll get you guys some vids. Between work, family, and the car things have been real busy. I'll be picking the car up this Saturday. Hoping to get the dyno vid at that time. I'll ask Vince to vid the fire up session before loading it in the trailor. Hell, if he'll let me I'll spin some brodies in the parking lot before she loads.

Originally Posted by Sieg

I found that interesting as well, how did that piece come into existence?

The air box is carbon fiber and came with a lid. It's one of those deals you'd see on a K&N or ARCA series car. I've was using it with the lid but this time around we installed a 2" HVH carb spacer so the hood wouldn't close with the lid. A few modifications later we were able to still use the pan. Now we just need to find or get the box to hood sealer.

[intocarss]

"I'll spin some brodies in the parking" YOU ARE OLD SCHOOL

[Track Junky]

I think brodies was used a couple of generations after me. I normally say donuts and would have used that term but I think the youngsters on this site would have thought I'd be headed to a Starbucks or a Pete's.

[intocarss]

Originally Posted by Track Junky

I think brodies was used a couple of generations after me. I normally say donuts and would have used that term but I think the youngsters on this site would have thought I'd be headed to a Starbucks or a Pete's.

[Track Junky]

Doh!!