Very nice Tom, great size as well! Good luck with the new project. One thing that I would consider is either another overhead door or increasing the height of the door, you never know when you want drive in a monster truck to work on??
Thanks Rick! I know the print shows a 16x8' but we are upping that to 9'. Any vehicle taller than that we'll have to just take the wheels off of... Right now with our 8' doors at the current shop we can back the trailer in with a car on it so that was our goal again with a little more room for something taller.
Congrat's,Tom to you and the rest of amazing Farrington Clan.I hope the weather is holding out for you guy's.I wish you guy's were closer I would love to come put my hammer swinging skill's to use.Kevin and I may come to Indy GoodGuy's if so see you then.
Congrats, that's a big shop. I convinced Darcy we need a 30x40 to work out of. The next day she told me she thinks we'll out grow a 30x40 to fast and we should do at least a 60x40. This stuff is a lot more fun and easier to make happen when the wife is on board.
Sounds like myself and a group of buddies are going to make a guys trip down to Indy for Good Guys. Hopefully we'll have some time to catch up. Thanks for grabbing that cowl panel btw.
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Right now with our 8' doors at the current shop we can back the trailer in with a car on it so that was our goal again with a little more room for something taller.
Hybrid Mode
