Chad's 68 Camaro V3.0 build. LS3 & TCI goodies

[72Z/28]

Originally Posted by Chad-1stGen

Ah ok, I don't know anything about the Speedtech setup. Perhaps you won't have any issue during driving. For me the rubbing only occurred at close to full lock, so those conditions are usually at low speeds so not like there is a ton of extra stress driving except maybe a super tight autocross course.

My fix will involve modification to the lower control arm. I've heard of mods done to clock the inner fender to create some more room.

The good thing about Speedtech LCA is that it has adjustable steering stop which prevents tire to frame contact.

[Gambit]

wow dude, just read this over the last few days while I've been sick in bed. Hope you're on the track to getting it all sorted!!

Never been a big fan of red cars but the pic of post 208 could easily sway me.
Can't wait to see an update where you're back out on the track!

Cheers

[Chad-1stGen]

Originally Posted by Gambit

wow dude, just read this over the last few days while I've been sick in bed. Hope you're on the track to getting it all sorted!!

Never been a big fan of red cars but the pic of post 208 could easily sway me.
Can't wait to see an update where you're back out on the track!

Cheers

Thanks Gambit!! LoL about the red car comment. I've thought that if I ever need to assign my car a name for some reason I'd call it "Just Another Red Camaro" ha ha.

I too can't wait for an update back on the track!

The car is getting closer. The car is currently undergoing some mods to bring it up to current spec for the TCI front subframe which should make fitting my 275 front tires a done deal.

Also may be adding some new suspension goodies. Will update once complete. And man I really want to hit the track!

[LM7_67]

Originally Posted by Chad-1stGen

Also may be adding some new suspension goodies. Will update once complete. And man I really want to hit the track!

Going to be ready in time for AutoClub this Saturday with SpeedVentures?

[Chad-1stGen]

Originally Posted by LM7_67

Going to be ready in time for AutoClub this Saturday with SpeedVentures?

Ha ha I wish!! Sadly, it will not. Are you going? Are you just doing Saturday or are they running Sunday too?

Saturday I'm going to the Chino air show but if you are running Sunday I might be able to stop by and watch.

[LM7_67]

Originally Posted by Chad-1stGen

Ha ha I wish!! Sadly, it will not. Are you going? Are you just doing Saturday or are they running Sunday too?

Saturday I'm going to the Chino air show but if you are running Sunday I might be able to stop by and watch.

They'll be running both days, but I'll just be there on Saturday.

[Chad-1stGen]

The car is back and ready for some fun!


I got the car back recently from TCI. While at their shop they made some changes to the Camaro Subframe and Torque arm setup to bring up to their current specs. I'm now able to stuff my R888 275 front tire with 6* of caster and -1* of camber with full turning radius!

With the updates to the suspension done it was time to focus on tuning the suspension for track day fun! The first step was upgrading to the Ridetech triple adjustable coil over shocks on all four corners. The car was then corner weighted and final ride height set, which you can see in this pic.



The front ended up in about the same place and the rear was raised slightly. The Ridetech shocks plus ride height adjustments completely transformed the car. With my old coil overs even at soft setting the car was still very stiff feeling for regular street driving and rough pavement transitions or bumps in the pavement were very unpleasant. Now even with the shocks tuned for baseline track setting the car is awesome on the street.

I left the spec sheet at home but I will post up my corner weights when I get a chance.

I still have some small work left to do on the car such as installing an oil cooler (first one I ordered and had waiting for me all this time was a hair too big) resealing the firewall where the new wiring harness and A/C lines pass through, etc.

I'm planning on doing some maiden testing out at Adams Motorsports Park. Next week for sure and I am trying to leave work early today to get out there too. So if anyone local wants to join me....