LS wiring harness ?

[Sheck44]

Todd
I routed mine above the Vintage Air unit which allowed me to pass the main harness wires over top of the unit to the ECU located above the glove box.

[Vince@Meanstreets]

Originally Posted by Sheck44

Todd
I routed mine above the Vintage Air unit which allowed me to pass the main harness wires over top of the unit to the ECU located above the glove box.

Sheck.....what grommet is that? Source please.

[Toddj1969]

Thanks for the pic Vince. I take it that's a LS3? What kind of HP is it making to the wheels?

[Vince@Meanstreets]

Originally Posted by Toddj1969

Thanks for the pic Vince. I take it that's a LS3? What kind of HP is it making to the wheels?

Thats Steves car but its a bad mofo LS7

Not responsible for monitor speakers bursting into flames but crank it up any ways.

[dhutton]

Originally Posted by Vince@MSperfab

Sheck.....what grommet is that? Source please.

Speartech has a grommet similar to that:

http://www.speartech.com/product_p/grommet.htm

Don

[Vince@Meanstreets]

Originally Posted by dhutton

Speartech has a grommet similar to that:

http://www.speartech.com/product_p/grommet.htm

Don

thanks don

[Sheck44]

lmfao, too funny Vince ...
So, thats the grommet that comes with the PSI harness, and behind that I made a 3" round plate (painted black) to help support the weight of the harness in the firewall.

Todd .. to answer your question 674 Hp and 700 tq at the wheels

Cheers
Steve