Entropy Radiators now available from MCB!

[MCB Matt]

The controller offered by Entropy will run the fans 100% independent of the LS or any computer. It can be triggered by its own sensor and programmed for on/off temps and can start the fans at half speed so the alternator doesn't take such a hard hit every time they spin up. It also has an AC input trigger you can run from a Trinary switch or any trigger you choose. It can be mounted in the car or under the hood, the wire length included is quite long.

They use 10GA wire and dual 40A fuses too.

OE non corrosive sensor. A bung for it can be installed at no extra cost or you can run it in the head.

160-215 turn on range

Take a look at it in entropys site under harness kits

Matt

[Moose]

Originally Posted by MCB Matt

The controller offered by Entropy will run the fans 100% independent of the LS or any computer. It can be triggered by its own sensor and programmed for on/off temps and can start the fans at half speed so the alternator doesn't take such a hard hit every time they spin up. It also has an AC input trigger you can run from a Trinary switch or any trigger you choose. It can be mounted in the car or under the hood, the wire length included is quite long.

They use 10GA wire and dual 40A fuses too.

OE non corrosive sensor. A bung for it can be installed at no extra cost or you can run it in the head.

160-215 turn on range

Take a look at it in entropys site under harness kits

Matt

thanks Matt.. I'll get back with you in a few weeks after vacation to get it ordered.

[MCB Matt]

Ok, sounds good. Enjoy your vacay!

Thanks
Matt

[Dipped]

Those look awesome! And the price is more than reasonable. Are they manufactured stateside?

Thanks.

[ProTouring442]

I've had an Entropy in my daily driver Jeep for about a year now. Works great. I would highly recommend them.

[MCB Matt]

Originally Posted by Dipped

Those look awesome! And the price is more than reasonable. Are they manufactured stateside?

Thanks.

Yes, they are made here in the US.

Let me know if you need a price, we are also now offering PRC radiator packages as well.

Thanks
Matt