Quadralink vs Morrison tri 4 bar

[jarhead]

Originally Posted by Spiffav8

I've ridden in them all and they are all beyond nice and think you're good to go on that aspect.

I haven't installed or seen a DSE install in person, but they make it pretty straight forward. I have the AME 4 Four Bar and it went in super easy. It literally slides right into place. The frame is already notched for Minitubs which is nice. While I haven't gotten to this stage and seen it happen, AME says you can run a stock width fuel tank and there is plenty of room for the exhaust, so no need to notch the the trunk pan.

I think both are very high quality products and either way you won't be disappointed. You already have DSE up front and I'm a firm believer in matching tops and bottoms and personally would go that route because of that.

There are pluses and minus to all of them. Good Luck!

Curtis,
I know this is an old post, do you have any install pictures on your car or a link?

Thanks, Joe

[Spiffav8]

Originally Posted by jarhead

Curtis,
I know this is an old post, do you have any install pictures on your car or a link?

Thanks, Joe

Joe....Start at page 11 and fast forward as needed. Just crappy iPhone pictures, but it's all I have. I don't have any of it all put together and installed, but I will say it was super easy. If I knew how to weld, I could have done it myself. It really is a no brainier. Hope it helps. Feel free to PM me if you have any questions. I'll tell you what I know and make up a few lies about the rest.



https://lateral-g.net/forums/show...=46927&page=11