LS7 Dry sump oil line routing

[colorado80439]

Originally Posted by CamaroAJ

Lines need to run low for a gravity feed so the pump works right. Lucky the LS7 pan has two drain bolts so you only have to worry about fitting the tank. Look
at Hellfire and Jackass 2.0 builds as to how Mark has put the tanks in that area.

http://i439.photobucket.com/albums/q...psq7enrlm3.jpg

I guess my question is how/where do I run the line from the tank to the pan and keep positive gravity feed, I would like to go in front of the headers. Maybe a hard line passing through the subframe, I would like and easier route