1965 Mustang Restomod Convertible

[GPR]

The lower cowl was removed.





All the rust was removed and epoxy primed





The back side of the dash was sanded and epoxy primed



Lower cowl clamped in place and Brian spot welded.





Brian welding the upper cowl and welds cleaned up.

[GPR]

We decided to replace the floor since there was a lot of small holes in it.



Found a few small holes in the inner rocker panel



This is what we found in the inner rocker panel.





Both left and right inner rocker panels along with the right outer rocker panel were replaced.



Also replaced the lower right A pillar





New floor pan sanded and epoxy primed before installing