Flush Glass on 1970 Chevelle or "A-bodies for that matter"

[TechNova]

Originally Posted by FUUKN PHATGUY

Pretty sure you can get a thicker eeurethane rope seal, or just put tiny spaces to hold it flush, and use urethane walking
You can get the black trip by the roll to go between glass and body.
But without cutting glass to fit the gap better, you will ne stuck with a big plastic spacer

Sent from my SM-S921W using Tapatalk

The rope seal is not urethane and should never be used. You could however cut the tip different on the urethane tube and make a taller bead.