2nd gen backspace question with 335 ans mini tub

[gmbdabest]

Im running 5.5 backspace on 18x12 with DSE rear and quadralink

[randy]

Originally Posted by badazz81z28

Hmmm. DSE told me 5.5" backspace but my rear is 56.250 flange to flange. If they run 5.5" with a 54-3/4", that's not gonna work for me.

Ok so if that is true you are 1 3/4" shorter or a extra 7/8" longer on each side so then add that 7/8s on the backspacing of 5.5 backspacing since it would be to far out. That would give you a backspacing of 6.375 and put the outer lip of the rim in the same location DSE would have it if you used their specs

[badazz81z28]

Originally Posted by gmbdabest

Im running 5.5 backspace on 18x12 with DSE rear and quadralink

May I ask if your fender lips are rolled or trimmed? Any pics?

[Vince@Meanstreets]

Originally Posted by badazz81z28

May I ask if your fender lips are rolled or trimmed? Any pics?

no need with a narrowed rear end.

[badazz81z28]

Originally Posted by Vince@Meanstreets

no need with a narrowed rear end.

Check this out Vince, that's why I am so concerned.

http://www.pro-touring.com/threads/1...for-DSE-Camaro

[gmbdabest]

Lips are not rolled, i have 1 inch to the inner tub and 1.25 inches to the outer quarter lip. Cant remember exact length of rear but its DSE so they could tell you the correct length.

[gmbdabest]

sorry posted same pic, i can take pics of the rear supension, fenderwells anything you want to see, just let me know.

[badazz81z28]

Please, this whole set-up is spec'd by DSE but of course not going together as I envisioned. Pics would help a ton!

[badazz81z28]

If anyone else can post pics of the wheel lips would be highly appreciated