Production #54 '69 Camaro

[youthpastor]

We've made some good progress the past few weeks. The rear clip is welded in. We Modified the frame connectors to work like DSE ones- they sit nice and tight above the rockers. Brakes, Shock, suspension is all mocked up





The engine is in route from Wegner. The dyno sheet put it at 849.2 HP, but the cool part is it made over 700ft. from 3500-6200rpm's!! peaking at 4400 at 797! WOW!

[Rybar]

Looks good Chris, I'm curious to see install pics of that rear clip. Do you have any?

[youthpastor]

Originally Posted by Rybar

Looks good Chris, I'm curious to see install pics of that rear clip. Do you have any?

I will get some good pics when it goes back on the rack. Removing the rails was tricky not to swiss-cheese the floor. AME recommends leaving that small strip and just trim the rails up to the floor

[youthpastor]

With a Wegner Motorsports 416 LS


It made an honest 849.2 HP but the cool part is it made over 700 ft lbs of from 3500-6200! Peaking just under 800 at 4800.


We couldn't wait to get it mocked up.


Here's a glance of 3 of the LS projects going together right now.

[Musclerodz]

Originally Posted by youthpastor

With a Wegner Motorsports 416 LS


It made an honest 849.2 HP but the cool part is it made over 700 ft lbs of from 3500-6200! Peaking just under 800 at 4800.


We couldn't wait to get it mocked up.


Here's a glance of 3 of the LS projects going together right now.

crazy low end power these things are making. Ours made a tad more, but in all fairness I think Casey only heard "break it" and not "break it in" Are you leaving the gas pedal out? Your not gonna need it

did they dyno it with the 105mm tb?

[Bucketlist2012]

Originally Posted by youthpastor

With a Wegner Motorsports 416 LS


It made an honest 849.2 HP but the cool part is it made over 700 ft lbs of from 3500-6200! Peaking just under 800 at 4800.


We couldn't wait to get it mocked up.


Here's a glance of 3 of the LS projects going together right now.

Wow...another really nice build coming.

Great work you are doing..

Mike V

[syborg tt]

Another great project can't wait to see this one finished.

ps my motor is heading to Wegner in about 3 weeks

[waynieZ]

That an awesome car to start with. I love their motors amazing power.
subscribed

[EBMC]

Cool projects goin on Chris! congrats

[tones2SS]

Originally Posted by youthpastor

Good stuff right there. Nice build Chris.