shifter boots. - Lateral-g Forums

Blown353 · #1 02-17-2008, 08:29 PM

Quick question guys.

Right now I'm in the middle of rebuilding my entire trans tunnel (raised for reduced u-joint working angle & more driveshaft clearance.)

Anyways, I'm not going to be able to run my factory console anymore, so I'll just have my shifter poking up through the floor.

What's the ideal boot situation for this? I'd like a rubber boot to keep the fumes out but want something better looking (i.e. leather) over that. Just wondering what other people have done...

What I want is a final result similar to Mark's:

Thanks in advance...

Bowtieracing · #2 02-18-2008, 06:04 AM

I have asked same once and i know today its Lokar shifter boot . You can get one easily from summit etc. But its only the fake leather boot and trim ring. You still need good rubber boot on the trans tunnel to seal fumes and noise. I have seen orginal T56 / F body rubber boots fore sale in ebay ( in case you have T56 trans )

**XcYZ** · #3 02-18-2008, 09:46 AM

I have an old beater rubber boot that I plan on putting in the floor, then use this Lokar boot and ring.

awr68 · #4 02-18-2008, 10:52 AM

Scott, what rubber boot are you using? Stock T56 F-Body?

Bowtieracing · #5 02-18-2008, 11:34 AM

Quote:

Originally Posted by awr68

Scott, what rubber boot are you using? Stock T56 F-Body?

No thats me with the T56 boot , Scott is using old beater rubber boot

And here you can have em both in same deal Old beater T56 rubber boot

http://cgi.ebay.com/ebaymotors/98-02...QQcmdZViewItem

awr68 · #6 02-18-2008, 01:29 PM

I'm thinking I would have trouble using one of those and my Lokar boot with the round trim ring.

Silver69LS1 · #7 03-12-2008, 04:49 PM

[QUOTE=XcYZ]I have an old beater rubber boot that I plan on putting in the floor, then use this Lokar boot and ring.

Scott,

I'm putting a 4l80E w/ Paddle shifters in mine. I want to avoid putting one of those goofy plastic boxes (B&M, Hurst) on my floor. I won't be running a console. I like the lokar boot you have in the pic. What shifter is under that boot? Is that AOD Billet knob Lokar too?

Thanks,

Rich

**XcYZ** · #8 03-13-2008, 05:21 AM

Rich, I'm running a T56. That pic that I posted is a generic picture that Lokar has on their website for the boot and trim ring that I have.

Here's a pic of it in my car. I was just trial fitting it, seeing how tall the boot is, etc.

**syborg tt** · #9 03-14-2008, 06:37 AM

Looks really Nice Scott. Thank you for sharing the picture