285/35/19 on a 3" lowered 1969 camaro 10" wheel no mini tub

[morris69]

the issue im having is that BFG doesnt sell KDWs anymore. Im running 275/35/19s 10" tire. Its lowered 3" with DSE lowering springs.

A friend of mine has a pair of 285/35/19s for sale, will they fit? or is 275 the largest size I can run without being mini tubbed.

Any other tire options if those 285s are to big

[Nine Ball]

If your axle is centered perfectly, you can run the 285 wide tire on the '69 if you are willing to cut the outer fender lip down, or roll it flat. Might also need to move your exhaust tips, if they are next to the back of the tire.

Wheel offsets are going to have to be perfect, too.

I had a pair of 285/35-19 on my previous car. Stock wheel tubs, stock axle, 10.0 wheel with 5.5" backspace, rolled outer fenders, hammered a little on the inner wheel housing. But, it worked.





Tony

[morris69]

Thanks bro. That was what i,thought. Because on one side the 275s rub. So I'm going to have to center the rear-end.? How do i,do,that?

[Neil B]

Originally Posted by morris69

Thanks bro. That was what i,thought. Because on one side the 275s rub. So I'm going to have to center the rear-end.? How do i,do,that?

You'll have to cut the leaf spring brackets off and re-weld them. I actually had my rear wheels made with different offsets side to side because of this.

[morris69]

So it's not as easy as loosening up the rear end and pushing it over then bolting it back up

[hifi875]

i have 285/30/20 on my camaro. non tubbed. barely I mean barely fit.