Thanks color has been the Hardest choice i do have it narrowed down but the colors i have in mind are a cinnamon and creme off white top two tone, with painted frame etc. and keeping a good bit of an older theme and feel to the car. other than really the wheels its just hard to ignore how bitchin wide billets look on a pro streeter lol thanks
LOL Ive been asked that before and NO its not going to have a digital dash,
Im designing an orginal style gauge face with my tach and speedo built in with the face color the same as interior color witch ill be creme,
And yes they will be traditional pro street sizes 15x4 and 15x14 rears on air ride! with a 4-link and a 9" with 4.56 gears.
Actually next project is raising my drive shaf tunnel to clear my drive shaft! a few more inches! That and getting ready to open the top of my hood like an early merc custom. so getting the rest of this mock up done i'll be getting pretty close to getting body back off frame to start on it ! i'll keep you posted
Motor and tranny are in it for mock up yet but engine is going to the machine shop very soon! will be a 406 SB with AFR heads scat crank 6" rods single plane and demon carb fabricated value covers msd etc , and a 350 tranny with a valve body and a 3,500 stahl.
Heres the motor with the old parts on it now for clerance and mock up!
Well no turning back now i opened up my hood today laying my cut line and measuring a miliion and one times. But work pretty well just took my time opening it up have to build my innder fender wells and latch area now, and will be one peiceing the bottom of the hood but nice to be making some progress the hood use to open where it meets the fenders but i welded it up and wanted a custom pancake style opening damn i hope all this custom work is worth it in the end well i'll keep ya posted later George