3 inch or 2.5 inch exhaust - Lateral-g Forums

SteveMcqueenRules · #1 10-13-2007, 03:31 PM

check out the latest issue of car craft there is a great article on this very topic with dyno testing proof.

6D9 · #2 10-19-2007, 09:09 AM

Car Craft just did an article on 2.5" vs 3.0" exhaust this month. The motor was a 500HP 383 Chevy. Both systems were Flowmaster mandrel bent with Super 44 muffs. Peak for peak there was only a 3HP difference between the two systems. But in the mid range there was a 10hp/10tq gain at a few rpm points. So it at that power level if you have a really low car or dont want a bunch of noise the 2.5" mandrel system with high flow muffs can work really well.

Dang...you must of typed that right before me!

HILROD · #3 10-19-2007, 04:06 PM

My Camaro has a 3in X pipe into 2.5 mufflers and tailpipes. This is with a supercharged 355. I've had fitment problems in the past, worse when mini-tubbed, with 3 inch tailpipes. I did a lot of searching before I bought anything. I think this is the best compromise. I don't think it gives up any noticible power. It's also quieter than full 3 inch systems. When I'm in boost that's a good thing.