Bored so I took some random pics of my car..

[Vegas69]

I hate to yank your chain but your car is one of the nicest I have seen to date. Really well done. I wasn't that impressed until I saw it in person.

[ohcbird]

One day, those will all amount to your "before I started to drive the piss out of it" shots. Nice rig!

worst car ive ever seen, is what i say when i look at my car now

[Steve1968LS2]

Originally Posted by Vegas69

I hate to yank your chain but your car is one of the nicest I have seen to date. Really well done. I wasn't that impressed until I saw it in person.

Thanks, It's really easy to make it all nice and sexy in photos.. hell, you should see some of the cars we shoot.

It's a big compliment that you liked it in person. I'm just a guy with some tools and a vision, but without a very talented group of people to work with the car wouldn't have been built.. twice. lol

Gonna snap some more tomorrow for Scott.. he requested a bunch of shots for some sort of "Skunkworks" deal he's working on.

[Steve1968LS2]

Originally Posted by ohcbird

One day, those will all amount to your "before I started to drive the piss out of it" shots. Nice rig!

Rock chips don't show up well in pics.. thank god.. besides, I'm having deflector shields added. They're powered by my new flux capacitor.. Ok, it will just be Xpel, spray guard and blue tape...

Originally Posted by 4MuscleMachines

Steve, I like the way you made your upper rad hose. If you don't mind, what parts did you use? How did you get the elbows done?

Secondly (edit), what coupler did you use at the end of the tb elbow going into the maf?

It's the same NAPA hose I used for my '69 but it was a bit long so I cut a chunk out of the middle and made a barbed pipe to join them (with more Gates thermo-couplers). The upper hose part number is 8301 and the lower hose's number is 9038.

The 90-degree elbow on the intake is a cast aluminum piece from Street and Performance. They also modified the MAF with a billet ring that holds to the elbow with three set screws. This way I only needed a rubber coupling hose on one side. I think they will even make with the set-screw deal on both sides if you ask. The rest is made from 4-inch exhaust pipe (a straight piece and a 45).

[tyoneal]

Steve:

Post as many random shots as you have time for, they are really nice to look at.

BTW: What shifter do you use, and what is the distance between gears? (I'm assuming it's a short throw)

Take acre,

Ty O'Neal

[Steve1968LS2]

Originally Posted by tyoneal

Steve:

Post as many random shots as you have time for, they are really nice to look at.

BTW: What shifter do you use, and what is the distance between gears? (I'm assuming it's a short throw)

Take acre,

Ty O'Neal

It's the old McLeod deal with the Belville washers. They don't sell it now, but Red still sells them. Very nice feel to it. Short throw, but I've never measured. The shift ball is MOMO.

[jeff hanson]

Car looks great!! Do you have new contact info for Red?

[Ummgawa]

That car is unbelievable. I cannot believe your aren't in jail from the first person hitting you. The wait was definately worth it. Post as many pix as you can stand because WE can stand it.

[RaceMan]

I think I'm in love !!! That's just awsome!!!