Schwartz Camaro full frame weights

[jeff s]

Originally Posted by tyoneal

=========================================
Jeff:

Can you post some additional pictures of your chassis with the side port exhaust and without it?
Dont have pics of any without it. Just imagine the smaller tube going forward a bit more.
Also, do you have some pictures with the frame mounted with a body on it?
Yes

What is the ride height when finished?
It's adjustable, depends where you have it adjusted

Do you have any performance stats with a complete car?
Yes but it's meaningless without either before and after data, or comparison against another product on the same day at the same venue, which you'll see in 2008. I'm also now working on videos of flex of a subframe equipped car vs ours.

Do you, "Set the Car Up", once the chassis is installed? (For Best Handling)
Yes, if we build the car, or it's sent to us for that.

What rear end suspensions can you set up with your chassis?
Our spherical rod end, triangulated 4 bar with splined end link sway bar.
Coil over shocks or Air Ride shockwaves.
Are your Chassis usually shipped or dod you do the install on them?
Both ways and up to complete project

Thanks,

Ty O'Neal

Thanks
Jeff