Bought My Rushforth's

[The WidowMaker]

jon, not a problem.

i got the frame off the rotisserie and onto the old wheels and i put the body on the rotisserie. its going out to have the bottom blasted in the next couple of weeks. almost everything else is new sheet metal.

i cant wait for the new rushforths, i just need to make up my mind on which ones first. jason's rendering will help with that though.

Tim

[DriverzInc]

Originally Posted by 430 hp 70

jon, not a problem.

i got the frame off the rotisserie and onto the old wheels and i put the body on the rotisserie. its going out to have the bottom blasted in the next couple of weeks. almost everything else is new sheet metal.

i cant wait for the new rushforths, i just need to make up my mind on which ones first. jason's rendering will help with that though.

Tim

Tim,

Have a GREAT match... they actually call it titanium. The color is 99% right on with your sample, so I would say it's a go. They had some suspension parts there in that color, and someone's rear end too. If you like, I can have a center cap shot in the color so you can see. Let me know. Also, let me know what you would like done with the piece I have.

[The WidowMaker]

jon - im going to try to make it out to the show this weekend. it all depends on the weather though. if i do, id love to see the sample, and i can pick up my bracket at the same time. if the weather doesnt cooperate, ill figure something else out.

thansk, Tim

[JT_67Tempest]

Jon at DriverzInc is definitely cool guy! I ordered a set of Rushforths from him as well. He was kind enough to pull the rear wheel off his Chevelle to make sure it would fit on my Tempest since they are both A-bodies.

Again great shop and great customer service, would definitely recommend to do business with!

Johnny