Project "Payback" - Lateral-g Forums

Vegas69 · #1 05-07-2008, 02:33 AM

Anthony...I am hoping to not feel that pain.

Appreciate the kind words sick 4dr. Well me and Curtis spent a **** load of time tonight getting the bellhousing in alignment. It was setting right at .015 with the stock dowels. The best we could do with the offset dowels was .006. We found that about a inch of the bellhousing was rough enough to really sway our readings. The spec is .005 so we figure it's closer than most and basically it amounts to .0005 out of spec due to the circumfrance. So we spent 2 hours screwing with the dowels and runout and 15 minutes installing the engine.

Gotta love it. Here she is boys. Fits nice.

**Spiffav8** · #2 05-07-2008, 02:39 AM

That bad boy went in Super Smooth! Hope the rest of the car goes that easy.

Efi69Cam · #3 05-07-2008, 11:26 AM

Quote:

Originally Posted by Vegas69

Anthony...I am hoping to not feel that pain.

Appreciate the kind words sick 4dr. Well me and Curtis spent a **** load of time tonight getting the bellhousing in alignment. It was setting right at .015 with the stock dowels. The best we could do with the offset dowels was .006. We found that about a inch of the bellhousing was rough enough to really sway our readings. The spec is .005 so we figure it's closer than most and basically it amounts to .0005 out of spec due to the circumfrance. So we spent 2 hours screwing with the dowels and runout and 15 minutes installing the engine.

Gotta love it. Here she is boys. Fits nice.

Looks sweet. Thanks for the motivation.

Whose front accessory system is that? It does not look quite like the vintage air.

skatinjay27 · #4 05-07-2008, 05:08 PM

sweet!!! i bet that feels like a BIG mile marker getting that engine in there!
that big block looks at home in there.

**DOOM** · #5 05-10-2008, 05:56 PM

Hey Todd
Thanx again for letting me come over and see the Camaro

I see the engine is in! Not much longer, I hope before its ready to fire!!!!! Thanx again!
Mario

Vegas69 · #6 05-10-2008, 08:43 PM

Tranny is in...what a mother ***** ****** ****

I am so wore out I don't fee like going into detail. Later

**Spiffav8** · #7 05-10-2008, 11:46 PM

At least it's in...and fits.

monza · #8 05-11-2008, 12:54 AM

Just went from the first post until now......
your car is really Badass! Can't wait to see it done and your close~NICE!