...

Go Back   Lateral-g Forums > Technical Discussions > Chassis and Suspension
User Name
Password



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 08-13-2008, 01:22 PM
Marcus SC&C's Avatar
Marcus SC&C Marcus SC&C is offline
Senior Member
 
Join Date: Apr 2005
Location: S.E. PA.
Posts: 169
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Each one if better for different people and different applications. For most folks conventional springs and adj. rate shocks will give them 75% of the adjustability they`ll actually get out of a coil over. With the advent of things like our SPC tubular lower A arms with adj. ride height the gap closes even more. Coil overs will allow faster changing of springs and a bit easier shock adjustment and a small weight savings. On a race car those things may be important and a few select street cars that see a lot of track time may benefit as well. Coil overs also allow a large enough range of adjustability that if the end user isn`t well versed in their use they can set them totally wrong and cause problems. There are no fail safes. It`s much harder to set up a conventional coil spring/shock combo wrong. With comparable motion ratios,spring rates and dampening rates both configurations will perform exactly the same. Basically we sell a lot of coil over conversions but we probably still talk more people out of them than into them. Mark SC&C
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:27 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net