Need help lowering my 2dr Tahoe

[GBodyGMachine]

www.fullsizechevy.com

Great source

FLIP KIT

Jeff

[KSBRKTRACER]

Thank you for the responses, guess i need to decide how far I want to go, I had looked at belltech's website and never saw anything available for a 2dr and now I see it there. I have already put belltech spindles and shackles on it and it is not low enough that way........Guessing I will probably do a flip kit.
Thanks again
Tommy Lee

[CKTA]

Originally Posted by GBodyGMachine

www.fullsizechevy.com

Great source

FLIP KIT

Jeff

Thanks for the FSC plug....I'm a Mod. over there!

As for the 2 Door Hoe, I've lowered 2 of them. The Bell Tech (and or DJM) are actually a 4/5" drop. (4" in the front /5" in the rear)

For the front it's a matter of spindles and springs. For the rear it's a flip kit, but unlike the pick-up truck flip kits you only get 5" of drop (instead of 6") The reason being, you need to install the front hangers to raise it up another inch. You will also need to cut a good amount (3" high and frame rail to frame rail) of the rear crossmember right infront of the gas tank.
As usual you will need to C-notch the frame and grind and punch out the rivets for the front hangers. Not hard of a job at all, but time consuming. If you need any other help check me out over at fullsizechevy.com under the same user name or just check out and search on the site over there....alot of good info.