We got a good bit of metal work to do!! But for a car this old I was really happy about the condition under the paint. All I have found so far is a small pinhole at roof/quarter seem, and 1/2" or so hole at quarter/rocker seam both on passenger side. Easy fixes. Well and the rear valance is rough, but a hammer and dolly will fix that instead of filler like they did back in the day. I'll finish stripping the roof and doors tonight, then put the car back in epoxy primer and start the body work. For some reason bare metal cars are so hot!!!
Last edited by fletcherscustoms; 06-18-2009 at 06:18 AM.
|
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Threaded Mode