Project Never Enough

[awr68]

Very cool! I would put that new motor in the dining room...ya know, away from all the sanding dust!

Sweet progress...keep at it!!

[rich-allen]

It feels good to have a new LS2 with aluminum heads sitting in the garage doesn't it? Looking good the motor you just know it';s going to make your light weight car really scream.

Project looks great, post some pics of the new firewall plate as soon as you cut it.



Rich

[lhkustoms]

nice project its nice to see you stripping it all the way down and starting over so you know you have a great base to start from. keep the pics coming

[camaro2nv]

Heres some pics of the Motor. I know I have a long way to go but I bought the paint also,lol. HOK Nova Orange. Got all my Bondo, Glaze and Primer. I also took a pic of the drip rail. Getting close to getting this done.

[camaro2nv]

Slow going but here's a couple more.

[Sparks67]

Originally Posted by camaro2nv

Slow going but here's a couple more.

I don't see the fender bolt holes on your firewall. Although, it doesn't appear to be tack welded. I already seen one guy that forgot to drill those holes and welded it. There is some photos of my firewall on this link. http://www.kodakgallery.com/67rscama...n/67_camaro_rs

Jeff
http://www.kodakgallery.com/67rscamaro

[thedude327]

Looks like your making great progress with the bodywork. Are you adding a custom rear suspension or using the leaf springs ?

Paul

[camaro2nv]

I just set the firewall plate up there for fitment. Im still up in the air over to show the trim tag or not. I figured I have sooo much to do on the car that Ill just come back to that later,lol.

Prodigy Bar is the plan right now. Just need to save some cash. Christmas was rough on my build plans

[simbad's68]

Great progress.. Did you remove all the drip rail at one time, or remove small section and tack weld? I'm trying to decide whether to go smooth or use a 1/4" rod and taper it down.

[waynieZ]

Nice progress , and thats a nice shiny engine too.