Tricks or Ideas on how to remove glue from interior floor? - Lateral-g Forums

squid · #1 10-05-2005, 12:27 AM

After some elbow grease annd a putty knife, I used a wire cup brush on a 4" Angle grinder. It bared the metal but didn't cut into it. It looked like like brand new when I was done. It was a shame to cover it up. I used hammerite to spray it and then dynomat extreme.

**Steve1968LS2** · #2 10-11-2005, 09:30 AM

By the way..

I tried the GOOF OFF stuff in a spray can.. just dusted and area with it and it all came up VERY easily with a putty knife.. I was amazed at how well it worked!

I just need to wipe it down with laquer thinner and then go to town with the POR-15.

All original floors with just a tiny bit of surface rust. Looks like she once had welded in race seats.

Damn True · #3 10-11-2005, 09:55 AM

This is the best tool name ever!

http://buy1.snapon.com/catalog/item....re&dir=catalog

Tool, Air, Crud Removal

LOL!