G link Install, Super cool stuff, Lots of pics

[syborg tt]

Looks like a really nice kit Frank.

I know people have been asking what i am about to ask. What is the actually ride height ?

Is it possible to set the car up at 6.00" from the pinch weld ?

It doesn't look possible

[ProdigyCustoms]

No suspension system that uses stock rear frame rails is going to ride that low without being on the stops. EmptyNest is probably one of the lowest stock frame rail ride height cars around, and even with extended rockers is over 6" rocker to ground measurement.

So it is not a given suspension that limits ride height. This kit has enough adjustment to ride on the stops, but you would not want to do that

[syborg tt]

Originally Posted by ProdigyCustoms

No suspension system that uses stock rear frame rails is going to ride that low without being on the stops. EmptyNest is probably one of the lowest stock frame rail ride height cars around, and even with extended rockers is over 6" rocker to ground measurement.

So it is not a given suspension that limits ride height. This kit has enough adjustment to ride on the stops, but you would not want to do that

Thanks Frank - looks like i'm going to be cutting the next one up a little more then i planned.